Everything security, under one roof.
Ten service disciplines delivered by our own licensed technicians. No handoffs, no scope gaps, no surprises at service time.
Control who goes where — and when.
Securcom is a certified Gallagher and Integriti integrator. We design access control systems from the credential outward — mapping zones, time schedules, threat-level responses and door hardware before a single cable is run. Whether you need a standalone door solution or a multi-site enterprise system with hundreds of controlled points, our technicians design, install, configure and commission the entire system.
What's included
- Site access design — zone mapping, cardholder groups, schedules
- Controller, reader and door hardware supply and installation
- PoE load calculation and infrastructure design
- Gallagher Command Centre and Integriti server configuration
- Integration with CCTV, intercoms and building management
- Cardholder database migration and onboarding support
- Ongoing system administration and maintenance contracts
See what matters. Miss nothing.
We deploy Avigilon camera systems designed around your site's actual risk profile — not a generic layout. Our CCTV designs account for field of view, lighting conditions, resolution requirements, retention periods and network bandwidth from the outset. Avigilon's AI-powered analytics mean your cameras don't just record — they actively alert on defined behaviours, licence plates and persons of interest.
What's included
- Site-specific camera layout and field-of-view documentation
- Avigilon camera, NVR and ACC server supply and installation
- AI analytics configuration — loitering, direction, crowd, LPR
- Network bandwidth and storage capacity planning
- Integration with access control events and alarm triggers
- Remote viewing setup for authorised users
- Scheduled maintenance and lens cleaning contracts
Visitor management that works with the rest of the system.
Jacques video intercoms integrate directly with Gallagher and Integriti access control, allowing reception and security operators to verify, communicate with and grant access to visitors from a single interface. We install and configure the full Jacques system stack — from door stations and lift intercoms to IP master stations and integration with your CCTV and access platforms.
What's included
- Jacques door station and IP master station supply and installation
- Integration with Gallagher/Integriti access control for door release
- Lift intercom installation and commissioning
- Multi-tenant directory and call routing configuration
- CCTV snapshot on doorbell trigger
- Video storage and event logging
Intrusion detection built around your floor plan.
Securcom is nationally licensed to design and install Type 1a and Class 5 alarm systems — the highest security classifications for government and high-risk commercial sites. Systems are zoned to your actual building layout and not applied from a template. We account for masking requirements, after-hours schedules, hold-up points, duress workflows and monitoring integration at design stage.
Securcom holds national licences for Type 1a and Class 5 alarm systems — required for government facilities, defence-adjacent sites and high-security commercial environments. Available across all states we operate in.
What's included
- Site-specific zone design — PIR, reed switch, glass break, duress
- Type 1a and Class 5 system design and installation
- Alarm panel supply, installation and programming
- Arming and disarming schedules linked to access control
- Hold-up and duress point installation
- Back-to-base monitoring integration
- AS/NZS 2201 compliance documentation
A hard edge where the site needs one.
For sites that require a defined perimeter — industrial yards, data centres, government facilities, utilities infrastructure — Securcom designs and installs fencing, perimeter detection and fence-mounted alarm systems. We integrate perimeter events directly into your CCTV and access control platforms for unified situational awareness.
What's included
- Perimeter design and threat-level assessment
- Fence-mounted vibration and tensioned-wire detection
- Microwave and IR beam perimeter detection
- CCTV integration for perimeter event verification
- Vehicle bollard and crash-rated barrier integration
Infrastructure that carries security traffic reliably.
Security systems depend on network infrastructure — and when that infrastructure is underspecified, everything downstream suffers. Securcom designs and installs the PoE switching, fibre backbones and structured cabling that security systems run on. Every design includes a full PoE budget, per-port power allocation and cable schedule, documented and handed over at completion.
What's included
- PoE budget calculation per switch — 802.3af / at / bt per device
- Managed switch selection, configuration and VLAN design
- Fibre backbone installation (single and multi-mode)
- Cat6/6A structured cabling to AS/NZS 3080
- Patch panel and IDF/MDF rack installation
- Network documentation and as-built drawings
- Ongoing network monitoring and fault response
24/7 response. Every alert, every time.
Securcom's back-to-base monitoring service provides around-the-clock alarm response, escalated to nominated keyholders, security patrols or emergency services as required. All alarm events are logged, time-stamped and available for client review. Monitoring is available as a standalone service or bundled into a maintenance agreement.
What's included
- 24/7/365 alarm monitoring by Grade A1 monitoring centre
- Keyholder escalation per client-defined response matrix
- Security patrol dispatch
- Emergency services notification
- Full alarm event logging and monthly reporting
- Video verification available where cameras are installed
Vehicle and pedestrian access, controlled.
Securcom installs and integrates sliding, swing and boom gate automation for vehicle and pedestrian entry points. Gate controllers are integrated with your existing access control system so credential holders use the same card or mobile credential at gates as they do at internal doors — no separate system to manage.
What's included
- Sliding, swing and boom gate automation supply and installation
- Integration with Gallagher/Integriti access control
- Loop detection and safety edge installation
- LPR integration for automatic vehicle recognition
- Intercom at entry points linked to gate release
- Annual safety inspection and service
Structured cabling done once, done right.
Securcom installs structured data cabling for new fitouts, refurbishments and infrastructure upgrades. All cabling is installed and tested to AS/NZS 3080 and documented with full test reports and as-built drawings. We work alongside head contractors and fit-out teams and can coordinate directly with your IT team on rack layout, patching and labelling standards.
What's included
- Cat5e, Cat6 and Cat6A horizontal cabling
- Patch panel and floor outlet installation and labelling
- Fibre optic cable and termination
- Rack and enclosure supply and installation
- Fluke DSX cable certification to AS/NZS 3080
- As-built drawings and test report handover
Keeping systems at 100%, not just on paper.
Securcom offers scheduled maintenance contracts across all security disciplines. Maintenance visits are carried out by the same technicians who installed the system — they know how it's wired and why. Beyond scheduled visits, our rapid-dispatch fault response ensures issues are attended to quickly and resolved correctly the first time.
What's included
- Scheduled quarterly, bi-annual or annual service visits
- Rapid-dispatch fault response with defined response time SLAs
- Firmware and software update management
- Battery replacement and UPS testing
- Compliance documentation and service reporting
- 24/7 phone support for critical faults